Argos MDT-10DMN3 Bedienerhandbuch PDF herunterladen (Seite 7)

Remove the

rubber plug

Insert the hose

from the drain

outlet

Please follow the steps to setup the continuous drainage.

1. Switch off the unit and remove the plug from the mains.

2. Remove the rubber plug from the back of the unit.

3. Insert the drain tube (12mm outer diameter - not included)

to the continuous drainage port.

4. Place the other end in a drain. Make sure the tube is free

from twists and bends.

Note:

- The water tanke has to remain in place during the continuous

drainage.

- If the continuous drainage is no longer to use, remove the drain

tube and put the rubber plug back the drainage port.

CARE AND MAINTENANCE

Turn the dehumidifier off and remove the plug

from the wall outlet before cleaning.

1. Clean the Grille and Case

Use water and a mild detergent. Do not use bleach

or abrasives.

Do not splash water directly onto the main unit. Doing

so may cause an electrical shock, cause the insulation

to deteriorate, or cause the unit to rust.

The air intake and outlet grilles get soiled easily, so use

a vacuum attachment or brush to clean.

T in

Household

Drain

Cleaner

2. Clean the water tank

Every few weeks, clean the water tank to prevent growth of

mold, mildew and bacteria. Partially fill the water tank with

clean water and add a little mild detergent. Swish it around

in the water tank, empty and rinse.

NOTE: Do not use a dishwasher to clean the water tank.

After clean, the water tank must be in place and securely

seated for the dehumidifier to operate.

CONTINUOUS DRAINAGE

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Argos MDT-10DMN3 Bedienerhandbuch Seite 7